A decision to retrofit carbon fibre chamber doctor blade systems from Absolute Engineering on its eight-colour Comexi FJ 120 press has given Greys Packaging in Bristol improved print performance, reduced ink leakage and easier chamber handling, the company says.

The existing chambers were heavy units at 17.3kg in weight, raising concerns over lifting them into and out of the machine. The new Absolute chambers each weigh 7.3kg, significantly reducing the weight operators handle during removal, cleaning and refitting.

Absolute initially installed one chamber as a trial, and following its success, the press was equipped with a full set of eight units. The original Comexi loading system was still robust and in good condition, so Absolute adapted its replacement chambers to the existing crossbar, simplifying installation.

Absolute said the improvement in print quality is visible in “before and after” tonal control strips produced on the press, as pictured. It added that its sample shows cleaner dot definition, retaining fine detail in the lighter tints that is less clearly reproduced with the original chambers.

Improved ink flow has resolved ink flashing issues that were previously being experienced on the anilox, while ink leakage and ink flicking around the drums have been eliminated, helping to minimise waste and keep the press cleaner. Less ink collecting in trays also reduces fugitive emissions from solvent evaporation, said Absolute.

Reduced blade wear and easier cleaning have also brought further benefits to daily operation and maintenance.

“The Absolute chambers have made a real difference to our print quality and eliminated the ink leakage we were experiencing,” commented Tony Farquarson at Greys Packaging. “The 10kg weight saving per chamber has made handling much easier and safer for our operators, and cleaning is more straightforward too. The results from the trial gave us the confidence to upgrade all eight units.”